Commercial Auto Nut Processing Machine , Pecan Black Walnut Hulling Machine

400Kg capacity automatic pecan huller machine black walnut huller machine

Walnut huller machine is mainly used for peeling the shell of dried walnuts, and can flexibly adjust the internal gap according to the variety and size of the walnut, so as to achieve a good shelling effect. Walnut huller machine feeds from the upper hopper, and the shell and shell are separated after being shelled. Thereby facilitating manual branching and improving work efficiency.

Principle
The walnut sheller consists of a frame, a fan, a rotor, a single-phase motor, a screen (two types), a hopper, a vibrating screen, a V-belt wheel and a transmission triangle. After the machine is in normal operation, the walnut is quantitatively, uniformly and continuously put into the hopper. The walnut is broken under the repeated impact, friction and collision of the rotor. The walnut kernel and the broken shell pass under the rotating wind pressure and blow of the rotor. A sieve with a certain pore size (a large-diameter sieve for secondary de-granulation, a small peeled fruit after cleansing is replaced with a small-hole sieve for a second shelling) is filtered and separated. The shell and pellet of the walnut are blown out by the rotating fan, so that the light weight shell is blown out of the machine body, and the heavier weight is filtered through the sieve to achieve the purpose of cleaning.

Features
1. This product has light weight, small volume, convenient transportation, simple operation, flexible use and high processing efficiency.
2. The removal rate of the equipment is higher than 99%, and the damage rate of the walnut shell is less than 0.5%. Suitable for small processing enterprises or walnut processing business operators.
3. Walnut huller machine adopts 220V or 380V power motor with power of 0.75--3kW, energy saving and convenient use.
4. The machine has low failure rate, long service life, simple operation, convenient maintenance, and no consumables for long-term use.
5. the machine cost-effective, saving manpower, 1-2 people can operate, depending on the model, can process more than 3 tons per day.
6. The equipment runs smoothly, the noise is low, and the supply of parts is guaranteed.